Dynojet Power Vision Hızlı Başlangıç Kılavuzu - Sayfa 11

Otomobil Elektroniği Dynojet Power Vision için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dynojet Power Vision 17 sayfaları. For 2019-2022 can-am ryker 600/900
Ayrıca Dynojet Power Vision için: Kurulum Kılavuzu (6 sayfalar), Kurulum Kılavuzu (8 sayfalar), Kurulum Kılavuzu (7 sayfalar), Manuel (7 sayfalar), Kurulum Kılavuzu (7 sayfalar), Kurulum Kılavuzu (7 sayfalar), Kurulum Kılavuzu (7 sayfalar)

Sayfayı Yazdır
Dynojet Power Vision Hızlı Başlangıç Kılavuzu
FLASHING A DYNOJET PRE-CONFIGURED TUNE FILE
• Select Program Vehicle.
• Select a Dynojet Pre-Configured
Tune File to flash.
• Touch Select.
Note: You can edit any tune that's loaded in the Tune Manager prior to flashing your ECM. The Power Vi-
sion allows you to make basic adjustments to your tunes directly on the device without using a computer.
In order to gain full access to your tune files, you'll need to download them from the Power Vision to WinPV,
our custom tuning software.
Use the following steps to flash a
Dynojet Pre-Configured Tune to the ECM:
• Select Load Tune.
• Verify the tune information. If
the tune information is correct,
touch Continue.
The tune is now ready.
• Select Flash to flash this tune to the ECM.
Note: During the flash process, do not
turn off the bike. Once complete, you will
be prompted to turn the bike off for 10
seconds.
• Select Edit to edit this tune.
• Select Exit to exit the screen without
any changes.
• Select Dynojet
Pre-Configured Tunes.
The Power Vision will automati-
cally search for compatible tunes.
• Select a slot to save the selected
tune file.
Note: If there is any data
in the selected slot, it will
be overwritten.
• Touch Select.
Power Vision Quick Start Guide - 11