Gamber Johnson 7160-1028 설치 지침 - 페이지 2
{카테고리_이름} Gamber Johnson 7160-1028에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamber Johnson 7160-1028 2 페이지. Vehicle base for jeep compass
페이지 인쇄To Install:
1.
Using a T45 torx bit, remove the front passenger seat bolts and loosen the rear seat
bolts. The seat may need to be moved forward or backwards to access the seat
bolts.
2.
Lift the passenger seat and place the base between the seat and the vehicle floor.
3.
Reinstall the front passenger seat bolts and tighten. Tighten the rear passenger seat
bolts.
4.
Attach the riser using the 3/8-16 hex head bolts and washers included in the
hardware bag.
5.
To mount a pole onto the riser use the 3/8-16 carriage bolts,washers and nuts
included in the pole's hardware bag.
RISER
Base Installed With DS-LOWER-9 Pole
POLE
FRONT SEAT BOLT
BASE