Gamber Johnson 7160-1028 Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Автомобільні аксесуари Gamber Johnson 7160-1028. Gamber Johnson 7160-1028 2 сторінки. Vehicle base for jeep compass

Друкувати сторінку
To Install:
1.
Using a T45 torx bit, remove the front passenger seat bolts and loosen the rear seat
bolts. The seat may need to be moved forward or backwards to access the seat
bolts.
2.
Lift the passenger seat and place the base between the seat and the vehicle floor.
3.
Reinstall the front passenger seat bolts and tighten. Tighten the rear passenger seat
bolts.
4.
Attach the riser using the 3/8-16 hex head bolts and washers included in the
hardware bag.
5.
To mount a pole onto the riser use the 3/8-16 carriage bolts,washers and nuts
included in the pole's hardware bag.
RISER
Base Installed With DS-LOWER-9 Pole
POLE
FRONT SEAT BOLT
BASE