Deagostini MODEL SPACE Honda CB750 FOUR 조립 설명서 - 페이지 8
{카테고리_이름} Deagostini MODEL SPACE Honda CB750 FOUR에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Deagostini MODEL SPACE Honda CB750 FOUR 20 페이지. Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR에 대해서도 마찬가지입니다: 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지), 조립 설명서 (16 페이지)
페이지 인쇄
Honda CB750 FOUR: Assembly Guide
Fixing and adjusting the indicators, shock absorbers and rear fender
The indicators
Remove the indicators, and use a toothpick to place a
small amount of multi-purpose adhesive to the insides of
the indicator mounting holes. Put the indicators back into
their holes and fix them in place with masking tape until
the glue has dried.
The rear fender
If there are gaps between the rear fender and the adjacent parts, replace the type R
screws with type W screws, which are slightly longer.
360
The shock absorbers
Remove the screw holding the shock absorber in place.
Apply some multi-purpose adhesive to the inside of the hole,
and then retighten the screw. When the glue has dried, it will
fix the screw in place.
If one of the screw holes
has been damaged, apply
some instant adhesive to
the end of the screw from
inside the fender.