Deagostini MODEL SPACE Honda CB750 FOUR Instrukcja montażu - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 20 stron. Pack 12
Również dla Deagostini MODEL SPACE Honda CB750 FOUR: Instrukcja montażu (16 strony), Instrukcja montażu (16 strony), Instrukcja montażu (16 strony), Instrukcja montażu (16 strony), Instrukcja montażu (16 strony), Instrukcja montażu (16 strony), Instrukcja montażu (16 strony)

Drukuj stronę
Deagostini MODEL SPACE Honda CB750 FOUR Instrukcja montażu
Honda CB750 FOUR: Assembly Guide
Fixing and adjusting the indicators, shock absorbers and rear fender
The indicators
Remove the indicators, and use a toothpick to place a
small amount of multi-purpose adhesive to the insides of
the indicator mounting holes. Put the indicators back into
their holes and fix them in place with masking tape until
the glue has dried.
The rear fender
If there are gaps between the rear fender and the adjacent parts, replace the type R
screws with type W screws, which are slightly longer.
360
The shock absorbers
Remove the screw holding the shock absorber in place.
Apply some multi-purpose adhesive to the inside of the hole,
and then retighten the screw. When the glue has dried, it will
fix the screw in place.
If one of the screw holes
has been damaged, apply
some instant adhesive to
the end of the screw from
inside the fender.