Maintronic Casambi CBA UP 매뉴얼 - 페이지 7

{카테고리_이름} Maintronic Casambi CBA UP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maintronic Casambi CBA UP 20 페이지. Blind actuator
Maintronic Casambi CBA UP에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

페이지 인쇄

3.4 Operating notes

There are different methods to operate the blind

actuator.

Driving over driving time

In the case of driving over the driving time, a sin-

gle impulse (e.g. pressing a button or starting a

time-controlled scene) triggers the blind/shutter

etc. to move once to the zero point(OT) 0% or end

point(UT) 100%.

This driving time is stored in the parameters of

the actuator once and then recalled (see 4.4).

Driving to an absolute position

With a drive to an absolute position, any hori-

zontal position can be approached. The absolute

position is controlled by a slider (from OT 0% to

UT 100%), which determines the position of the

connected blind / shutter, etc..

Hori ontal position

60 %

Manual english

Slat adjustment

A slider can be used to adjust the angle of the slats

for venetian blinds. Furthermore, the slat position

is stored when moving to an absolute position and

the set value is automatically readjusted after re-

aching the driving position.

For example, if the blind shall be moved down

only a little bit and the slats are set to 5%. Then

after reaching the target position, the slats are set

to 5% again.

0% (open)

60 %

100% (closed)

Casambi blind actuator

Slat angle

85%

85 %

Single

Group

Single

Group