Maintronic Casambi CBA UP Handmatig - Pagina 7
Blader online of download pdf Handmatig voor {categorie_naam} Maintronic Casambi CBA UP. Maintronic Casambi CBA UP 20 pagina's. Blind actuator
Ook voor Maintronic Casambi CBA UP: Handmatig (12 pagina's)
3.4 Operating notes
There are different methods to operate the blind
actuator.
Driving over driving time
In the case of driving over the driving time, a sin-
gle impulse (e.g. pressing a button or starting a
time-controlled scene) triggers the blind/shutter
etc. to move once to the zero point(OT) 0% or end
point(UT) 100%.
This driving time is stored in the parameters of
the actuator once and then recalled (see 4.4).
Driving to an absolute position
With a drive to an absolute position, any hori-
zontal position can be approached. The absolute
position is controlled by a slider (from OT 0% to
UT 100%), which determines the position of the
connected blind / shutter, etc..
Hori ontal position
z
60 %
Manual english
7
Slat adjustment
A slider can be used to adjust the angle of the slats
for venetian blinds. Furthermore, the slat position
is stored when moving to an absolute position and
the set value is automatically readjusted after re-
aching the driving position.
For example, if the blind shall be moved down
only a little bit and the slats are set to 5%. Then
after reaching the target position, the slats are set
to 5% again.
0% (open)
5%
60 %
100% (closed)
Casambi blind actuator
Slat angle
85%
85 %
Single
Group
Single
Group