Core ColourPoint 사용자 설명서 - 페이지 12
{카테고리_이름} Core ColourPoint에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Core ColourPoint 20 페이지. Battery wireless up-light lithium
페이지 인쇄DMX Operation
CORE ColourPoint is equipped with a Wireless Solution
W-DMX wireless radio receiver. This allows the fixture
colour to be set up by or synchronized with sequences
produced by a DMX lighting controller.
A compatible W-DMX transmitter attached to a DMX
controller is necessary, available separately. This could be
a lighting desk, a specific controller, or a CORE Point 15,
20 or 30 Master unit.
When in DMX mode the display will show the current active
DMX Start Address.
The number of channels occupied is depends on the "DMX MODE" setting (4 or 5 channels may be
used by the fixture).
DMX Mode
The ColourPoint has 2 modes of operation.
From the "CHANGE Settings" menu select the "5
Mode
Chan
1
Red
th
5
2
Green
CHAN
Off
3
Blue
4
White
1
Red
th
5
2
Green
CHAN
M.
Fader
3
Blue
4
White
5
Dimmer (0-100%)
1
Red
th
5
CHAN
2
Green
Strobe
3
Blue
4
White
5
Strobe (0-30Hz)
DMX Start Address
To set the DMX start address press
keys to select the new start address then
ColourPoint User Manual V1_2
th
DMX CHANNEL" option as follows:
Function
This mode disables master dimmer and
strobe functions. Each of the colour values
may be set from 0 to 255.
This mode enables the fixture's overall colour,
set on channels 1 to 4, to be dimmed.
Values are 0 to 255, where 255 represents
100% output.
This mode enables the fixture's overall colour,
set on channels 1 to 4, to be strobed.
Values are 0 to 255, where 255 represents 30Hz
strobing.
key when the display shows the current address. Use the
DMX
Addr:
Notes
to confirm.
001
10