Core ColourPoint 사용자 설명서 - 페이지 14

{카테고리_이름} Core ColourPoint에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Core ColourPoint 20 페이지. Battery wireless up-light lithium

페이지 인쇄

1. DMX Operation

Pairing with a W-DMX Transmitter unit



Switch on the ColourPoint.



Ensure the ColourPoint is unpaired from any other transmitter (the LINK LED is OFF) – above.



Ensure the transmitter is within range and switched on. Press its 'FUNCTION' button for more

than 1s.



The transmitter will scan for all unlinked receivers for around 10 seconds; the LED will flash.



If pairing is successful the LINK LED on the ColourPoint will illuminate.



ALL Unlinked ColourPoint units (and other Unlinked W-DMX units too) may be linked at the

same time. No apparent limit to the number being paired.



For receiver units not to be paired with this transmitter, simply switch off those unwanted

receivers before this pairing process. They may be paired with a different transmitter after

switching on again and repeating the pairing process with the new transmitter.

Pairing with a CORE Point15, Point20 or Point30 Master unit



Switch on the ColourPoint.



Ensure the ColourPoint is unpaired from any other transmitter (the LINK LED is OFF) – above.



Ensure the Master unit is within range and switched on.



Select MODE MSTR  MSTR DMX  Add Unit  '+' to select 'YES' 



The transmitter will scan for all unlinked receivers for around 10 seconds; the LINK LEDs flash.



If pairing is successful the LINK LED on the ColourPoint will illuminate.



ALL Unlinked ColourPoint units (and other Unlinked W-DMX units too) may be linked at the

same time. No apparent limit to the number being paired.



For receiver units not to be paired with this transmitter, simply switch off those unwanted

receivers before this pairing process. They may be paired with a different transmitter after

switching on again and repeating the pairing process with the new transmitter.

For successful linking the receiver must fulfill the following conditions:

Distance to transmitter (in free air)



Less than 200m for Micro model transmitter



Less than 500m for BlackBox or WhiteBox transmitter

Position above obstacles (e.g. crowds and tress)



Minimum 1m

Pairing to a transmitter is remembered after power off or the battery is depleted.

This allows the system pairing to be set up in a warehouse and the whole system simply switched on at

the site, which makes deployment very simple.

ColourPoint User Manual V1_2

to confirm.