Dean Hembury 5 SE 사용 설명서 - 페이지 9

{카테고리_이름} Dean Hembury 5 SE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dean Hembury 5 SE 17 페이지.
Dean Hembury 5 SE에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

Flue Connections and Outlets

Dean Stoves can be flued from the top and the back, or with a vertical back box. Horizontal

flue from back of stove should not exceed 150mm.

All flue connections must be sealed. Doors in the register plate must be present or a soot box

fitted in the back or side of the fireplace to enable access to clean the chimney when the stove

is installed without a flue liner.

If the chimney has been lined and cannot be swept through the stove an access door on the first

length of flue must be installed for cleaning access.

The Hembury 5 SE model requires a 125mm (5") first length of flue then stepping up into a

minimum of 150mm (6") liner. When the Hembury 5 SE has a smoke except air slider fitted

the flue liner can be reduced to 125mm (5"). We strongly advise a 150mm (6") flue liner be

fitted when possible.

Diagrams showing the flue outlet from the top (A), back (B) and back box (C).

X = Position of baffle plat

Y = Back protection brick

Please Note: All Profile top stoves use the 6mm black rope seal supplied under the flue spigot

to bring the flue spigot flush with the stove