Gree FLEXX Series 설치 매뉴얼 - 페이지 12

{카테고리_이름} Gree FLEXX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree FLEXX Series 19 페이지. A coils

A-Coil

4.5 Ductwork

This coil is designed for a complete supply and return ductwork system.

Do not operate the unit without all ductwork completed.

Do not operate this product without all ductwork attached.

Inadequate ductwork that restricts airflow can result in improper performance and

compressor or heater failure. Ductwork is to be constructed in a manner that limits

restrictions and maintains suitable air velocity. Ductwork is to be sealed to the unit in a

manner that will prevent leakage.

Return ductwork: Do not terminate the return ductwork in an area that can

introduce toxic or objectionable fumes/odors into the ductwork. The return ductwork is

to be introduced into the coil.

Return Air Filters: Each installation must include a return air filter. This filtering may

be performed at the coil or externally such as a return air filter grille.

Install the furnace or blower and condensing unit according to the installation

instructions provided with the unit.

Position the cased coil on top of the furnace or blower cabinet and secure it using

field-provided screws.

NOTE: If the coil is to be installed on an oil furnace, it may be necessary to install a

field-installed transition between the furnace and the coil to prevent airflow restriction

and possible damage to the coil drain pan. See the oil furnace installation instructions

for details.

Risk of explosion or fire.

Can cause injury or death.