Gree FLEXX Series 설치 매뉴얼 - 페이지 13

{카테고리_이름} Gree FLEXX Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree FLEXX Series 19 페이지. A coils

A stable connection is required between the coil and the blower to prevent

dumping.

Based upon the actual conditions, if coil is installed as Fig (A), the coil should be

concealed in a specific room or space and make sure the coil is not accessible to the

general public.

Based upon the actual conditions, if coil is installed as Fig (B), make sure that there

is enough space for care and maintenance. And the coil is not accessible to the general

public.

Based upon the actual conditions, Multi-Position A-Coils come factory installed

with a vertical and horizontal drain pans and can be configured for upflow or horizontal

pull-through installations.

When the coil matches blower, the side which is nearby from coil is NOT allowed to

install electric heater kit. Recommended configuring is as shown below.

(a) Standard Application: Left hand shown / Right hand similar (not shown)

(b) Counter flow: Right hand shown / Left hand similar (not shown)

(d) Downward flow

(A)

(a)

(B)

A-Coil