Maiwe MIEN1203 사용자 설명서 - 페이지 10

{카테고리_이름} Maiwe MIEN1203에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Maiwe MIEN1203 14 페이지. Industrial ethernet switch

MIEN1203/MIEN2205 Industrial Ethernet Switch

3. Hardware installation

For most industrial applications, 35mm standard DIN rail installation is

very convenient. When you take out the device from the packing box, the rear

panel of MIEN1203/MIEN2205/MIE N2205-S/M should have a fixed DIN rail

connector. If the device needs to be clamped on the DIN rail, the installation of

the DIN rail should be checked before installation. It mainly includes the

following 2 items:

Whether the DIN rail is firmly fixed, whether other equipment is installed

on the DIN rail, and whether there is enough space for installing

MIEN1203/MIEN2205/MIEN2205-S/M.

Is there a power supply suitable for MIEN1203/ MIEN2205/

MIEN2205-S/M on the rail?

After selecting the installation location of MIEN1203/ MIEN2205/

MIEN2205-S/M, follow the steps below to install MIEN1203/ MIEN2205/

MIEN2205-S/M on the DIN rail:

Insert the upper part of the card rail into the card slot on the upper part of

the card rail connecting seat. Push down slightly on the upper panel of

MIEN1203/MIEN2205/MIEN2205-S/M and turn the device as shown in Figure

A below.

As shown in Figure B below, insert the DIN rail into the DIN rail

connector to confirm that the MIEN1203/MIEN2205/ MIEN2205-S/M device is

reliably installed on the rail.

After MIEN1203/ MIEN2205/ MIEN2205-S/M is correctly installed, the

cables can be installed and connected, including the cable connections of the

following interfaces.

Operation interface

- 6 -