HIKVISION 64 Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} HIKVISION 64 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION 64 Series 10 페이지. Network camera

Installation Manual of Network Camera

Concealed Mounting

Please make sure that the mounting surface is suitable for adhesive pasting.

Steps:

1. Drill on the mounting surface. As shown in Figure 6-6.

Make sure the drilling hole is big enough for the camera lens.

2. Remove a side of the adhesive tape on the bracket. Paste the bracket on the mounting surface

with aligning with the drilling hole. As shown in Figure 6-7.

3. Install the Block-shaped sensor unit into the bracket and make it to be buckled.

4. Tighten the fastening screw on the top of the bracket.

Figure 6-6 Drill on the Surface

Figure 6-7 Paste the Bracket