HIKVISION 64 Series Kurulum Kılavuzu - Sayfa 5

Güvenlik Kamerası HIKVISION 64 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKVISION 64 Series 10 sayfaları. Network camera

Installation Manual of Network Camera

Concealed Mounting

Please make sure that the mounting surface is suitable for adhesive pasting.

Steps:

1. Drill on the mounting surface. As shown in Figure 6-6.

Make sure the drilling hole is big enough for the camera lens.

2. Remove a side of the adhesive tape on the bracket. Paste the bracket on the mounting surface

with aligning with the drilling hole. As shown in Figure 6-7.

3. Install the Block-shaped sensor unit into the bracket and make it to be buckled.

4. Tighten the fastening screw on the top of the bracket.

Figure 6-6 Drill on the Surface

Figure 6-7 Paste the Bracket