HIKVISION 64 Series Kurulum Kılavuzu - Sayfa 7

Güvenlik Kamerası HIKVISION 64 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKVISION 64 Series 10 sayfaları. Network camera

Installation Manual of Network Camera

6.2.3 Installation of Cylindrical Sensor Unit

This series of camera only support concealed mounting.

Please make sure that the mounting surface is suitable for adhesive pasting.

Steps:

1. Drill on the mounting surface. As shown in Figure 6-11.

Make sure that the drilling hole is big enough for the camera lens.

2. Remove a side of the adhesive tape on the bracket. Paste the bracket on the mounting surface with

aligning with the drilling hole. As shown in Figure 6-12.

Figure 6-10 Hood the Cover

Figure 6-11 Drill on the Surface