HIKVISION ColorVU DS-2CE12DFT-F28 사용자 설명서 - 페이지 13
{카테고리_이름} HIKVISION ColorVU DS-2CE12DFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVU DS-2CE12DFT-F28 15 페이지. Turbo hd full time color series bullet camera
HIKVISION ColorVU DS-2CE12DFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
conditions, and delivering more accurate and sharper
image. You can set the 3 DNR value from 1 to 9.
MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.4 SMART LIGHT
SMART LIGHT is used to control the integrated white
light and avoid overexposure when the light is on. You
can set the light as AUTO or OFF
AUTO
Under the AUTO mode, the white light turns on
automatically as the environment becomes dark.
The THRESHOLD is the environmental light level at
which the white light turns on. The greater the value is,
the darker the environment is when the light is
activated.
The value of LEVEL controls the brightness of the white
light. The greater the value is, the brighter the light is.
OFF
The white light is always off except when alarm is set
and triggered.
MODE
You can set the MODE as MODE1 to get a brighter
image in low light conditions.
3.5 FUNCTIONS
In the FUNCTIONS sub-menu, you can set the privacy
mask, the motion detection, and DPC of the camera.
PRIVACY
The privacy mask allows you to cover certain areas
which you don't want to be viewed, or recorded. Up to
4 privacy areas are configurable.
Figure 3-6 SMART LIGHT
MODE
AREA 0
AREA 1
AREA 2
AREA 3
COLOR
TRANSPARENCY
BACK
EXIT
SAVE & EXIT
.
PRIVACY
ON
RED
OFF