HIKVISION ColorVU DS-2CE12DFT-F28 사용자 설명서 - 페이지 14
{카테고리_이름} HIKVISION ColorVU DS-2CE12DFT-F28에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVU DS-2CE12DFT-F28 15 페이지. Turbo hd full time color series bullet camera
HIKVISION ColorVU DS-2CE12DFT-F28에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
Select a PRIVACY area. Set the MODE as ON. Click
up/down/left/right button to define the position, and
the size of the area.
MOTION
In the user-defined motion detection surveillance area,
the moving object can be detected and the alarm will
be triggered. Up to 4 motion detection areas can be
configured.
Select a MOTION area. Set the MODE as ON. Click the
up/down/left/right button to define the position, and
the size of the area. Set the SENSITIVITY from 0 to 100.
DPC (Defective Pixel Correction)
Defective pixels are pixels in a CMOS image sensor,
which fail to sense light levels correctly.
This series of camera supports defective pixel correction.
You can set the DPC as ON or OFF.
3.6 FACTORY DEFAULT
Reset all the settings to the factory default.
3.7 SAVE & EXIT
Move the cursor to SAVE & EXIT and click Iris+ to save
the setting, and exit the menu.
Figure 3-7 PRIVACY
MOTION
MODE
AREA 0
AREA 1
AREA 2
AREA 3
SENSITIVITY
COLOR
TRANSPARENCY
BACK
EXIT
SAVE & EXIT
Figure 3-8 MOTION
OFF
50
RED
OFF
UD10216B-C