HIKVISION ColorVu DS-2CE12KF3T-E 사용자 설명서 - 페이지 12
{카테고리_이름} HIKVISION ColorVu DS-2CE12KF3T-E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION ColorVu DS-2CE12KF3T-E 19 페이지. Bullet & turret camera
페이지 인쇄
Figure 2-19 Snap Camera into Installation Plate
8. Secure the junction box body on the ceiling with
four PA4 × 25 screws.
Figure 2-20 Secure Junction Box Body
9. Route the cables through the bottom cable hole or
the side cable hole of the junction box and connect
the cables.
10. Combine the junction box cover with its body with
four PM4 screws.
Figure 2-21 Combine Junction Box Cover with Body
11. Refer to step 7 of 2.2.1 Ceiling Mounting without
Junction Box to adjust the angle.
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Use three PM4 × 10 screws to fix the installation
plate onto the wall mount.
Figure 2-22 Fix Wall Mount
7