HIKVISION ColorVu DS-2CE12KF3T-E Manual do utilizador - Página 12
Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION ColorVu DS-2CE12KF3T-E. HIKVISION ColorVu DS-2CE12KF3T-E 19 páginas. Bullet & turret camera
Imprimir página
Figure 2-19 Snap Camera into Installation Plate
8. Secure the junction box body on the ceiling with
four PA4 × 25 screws.
Figure 2-20 Secure Junction Box Body
9. Route the cables through the bottom cable hole or
the side cable hole of the junction box and connect
the cables.
10. Combine the junction box cover with its body with
four PM4 screws.
Figure 2-21 Combine Junction Box Cover with Body
11. Refer to step 7 of 2.2.1 Ceiling Mounting without
Junction Box to adjust the angle.
2.2.3 Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1. Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2. Use four M6 expansion bolts to fix the wall mount
onto the wall.
3. Use three PM4 × 10 screws to fix the installation
plate onto the wall mount.
Figure 2-22 Fix Wall Mount
7