HIKVISION D0T 사용자 설명서 - 페이지 7
{카테고리_이름} HIKVISION D0T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T 17 페이지. Audio turret camera
HIKVISION D0T에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (17 페이지)
페이지 인쇄
2 Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera, and the
mount.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I/V Camera
Before you start:
The installation of ceiling mounting and wall mounting
are similar. Following takes ceiling mounting as an
example.
Steps:
1. Loosen the screw to remove the mounting base
from the camera body.
Figure 2-1 Remove the Mounting Base
2. Drill screw holes and the cable hole on the ceiling.
Note:
Drill the cable hole in the center of the drill template,
when adopting the ceiling outlet to route the cable.
3. Secure the mounting base on the ceiling with
screws.
Figure 2-2 Secure the Mounting Base
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.