HIKVISION D0T PIR Series 사용자 설명서 - 페이지 10

{카테고리_이름} HIKVISION D0T PIR Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T PIR Series 16 페이지. Turbo hd bullet camera
HIKVISION D0T PIR Series에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄
HIKVISION D0T PIR Series 사용자 설명서
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body with
supplied screws on the junction box's cover.
Figure 2-13 Combine the Junction Box's Cover with its
8. Repeat the step 5 and 6 of 2.2.1 Ceiling/Wall
Mounting without Junction Box to complete the
installation.

3 Menu Description

Please follow the steps below to call the menu.
Note:
The menu description part is only for your reference. It
might have differences due to the specific model that
you have.
Steps:
1. Connect the camera with the TVI DVR, and the
monitor, shown as the figure 3-1.
2. Power on the analog camera, TVI DVR, and the
monitor to view the image on the monitor.
3. Click PTZ Control to enter the PTZ Control interface.
4. Call the camera menu by clicking
the preset No. 95.
Body
Figure 3-1 Connection
button, or call