Gree Versati II Series 서비스 매뉴얼 - 페이지 15
{카테고리_이름} Gree Versati II Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree Versati II Series 18 페이지. Air-to-water heat pump monobloc versati
Gree Versati II Series에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지)
페이지 인쇄
Test Operation & Troubleshooting & Maintenance
It is installed at the side of the suction line, and used
Vapor Liquid
to prevent liquid refrigerant entering the compressor,
Separator
which if not avoided will lead to wet compression or
even liquid slugging.
It is used the switch flow direction of refrigerant
and then realize switchover between cooling and
4-way Valve
heating. It also can be used for defrosting through the
counterflow.
It is the water-refrigerant plate type heat exchanger,
used to liquefy the high-temperature high-pressure
Plate Heat
vapor refrigerant or evaporate the low-temperature
Exchanger
low pressure liquid refrigerant. Heat of condensation
evaporation is supplied also by circulation water.
Water Pump
It is the power equipment for water circulation.
It is used to keep stable pressure of the water system.
The tank is charged with a certain volume of nitrogen
which is separated from the water side with a gasbag.
When pressure of the water side exceeds the nitrogen
Expansion Tank
pressure, the gasbag will expand and water enters
into the tank so as to lower the pressure of the water
system. In contract, when pressure of the water
system goes down, nitrogen in the tank will expel
water out to the water system.
13
is taken away by circulation water and heat for