Gamebox GBHD ADVANCE AGS-001 PCB 설치/조립 매뉴얼 - 페이지 11

{카테고리_이름} Gamebox GBHD ADVANCE AGS-001 PCB에 대한 설치/조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamebox GBHD ADVANCE AGS-001 PCB 11 페이지. Both 32 pin and 40 pin varients

페이지 인쇄

Gamebox GBHD ADVANCE AGS-001 PCB 설치/조립 매뉴얼

Section 8 Optional LitKit Installation

First locate and then remove the resistor at R15 and the LED located at LED02 on the GBHD Advance

PCB.

Next connect the 3.3v and the Ground from the LitKit PCB to these points on the GBHD Advance PCB

to these points at the highlighted power regulator.

3.3V

Finally connect the Data pin from the LitKit PCB to either of these highlighted points from R15, or

LED02. LitKit is compatible with the WS2812B addressable RGB LEDs, up to 10 for further customization. Easi-

ly integrated into other 3.3v logic.

Page 11