Gamebox GBHD ADVANCE AGS-001 PCB 설치/조립 매뉴얼 - 페이지 6

{카테고리_이름} Gamebox GBHD ADVANCE AGS-001 PCB에 대한 설치/조립 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamebox GBHD ADVANCE AGS-001 PCB 11 페이지. Both 32 pin and 40 pin varients

Gamebox GBHD ADVANCE AGS-001 PCB 설치/조립 매뉴얼
Section 2 Soldering the Flex Cable
Have the pins from the flex cables as close to the pins of the GBA processor as possible. Solder the
ground plane at the corner of the GBA processor. Once the pins are aligned solder pins 7 and 119. Further
secure the flex cable by soldering pin 32 of the cart slot and the two solder pads near CL1. Apply genourous
amounts of flux and drag solder the rest of the pins with a loaded soldering iron. Wick any bridges that form.
Bottom row pins
1 = 3.3v
3 = right trigger
4 = A
5 = B
6 = SO1
7 = SO2
Left row pins:
127 = start
126 = select
123 = right
122 = down
121 = left
120 = up
119 = left trigger
Ground Points
Ground Plane
32 = ground
CL1 = ground
Page 6