GameChanger plus pedal 사용자 설명서 - 페이지 6

{카테고리_이름} GameChanger plus pedal에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GameChanger plus pedal 8 페이지. Sustain unit for all melodic instruments

FOOTSWITCH

The WET Only Footswitch serves as a remote foot-controller that bypasses the

SPLIT & MIX toggle switch on the PLUS Pedal's side panel, thus letting you switch in

and out of the WET Only mode on the fly. This flexibility allows you to build up a rich

layer of ambient sound effects and then quickly unmute your instrument and

return to playing on top.

(Note: Switch for OUT 1 must be set to MIX in order to use the footswitch.)

When using the WET Only footswitch (plugged into "CLEAN OUT/FSW"), you can still

access the DRY only signal through a special DRY OUT output built into the

Footswitch itself.

AMP 1

AMP 2

USING MICROPHONES

PLUS Pedal is compatible with all types of microphones, but it does not have a

dedicated XLR input. For best results use a pre-amp to run the instrument's signal

into the PLUS Pedal via a 1/4 inch audio jack cable.

To achieve a smooth tone, always make sure that the gain level of the input signal

going into the PLUS Pedal is not clipping (see page 15 for input signal tech. specs)

*when using loud acoustic instruments in small

rooms try setting the PLUS Pedal's SPLIT - MIX

switch to "SPLIT" and running a second channel

for the DRY signal.

This way you can adjust the WET / DRY balance

more accurately on the mixing desk

mixing desk

microphone

pre-amp

WET

DRY