HIKVISION DS-2AE7230TI-A 사용자 설명서 - 페이지 5

{카테고리_이름} HIKVISION DS-2AE7230TI-A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2AE7230TI-A 11 페이지. Bullet & turret camera

4. Connect the corresponding cables.

5. Adjust the camera according to Figure 2-3 to get an

optimum angle.

1). Loosen the P screw to adjust the pan direction

[0°~360°]. Tighten the screw after completing

the adjustment.

2). Loosen the T screw to adjust the tilt direction

[0°~90°]. Tighten the screw after completing the

adjustment.

3). Loosen the R screw and rotate the camera

[0°~360°] to adjust the lens to the surveillance

angle. Tighten the screw after completing the

adjustment.

Pan Position Range

[0°-360°]

Tilt Position Range

[0°-90°]

2.1.2 Ceiling/Wall Mounting with Gang Box

You need to purchase a gang box separately if you adopt celling

mounting.

Steps:

1. Take apart the gang box and align the screw holes of

the bullet camera and the gang box cover.

2. Route the cables through the cable hole of gang box

and fix the camera with the gang box cover with the

supplied screws, as shown in Figure 2-4.

Figure 2-4 Fix the Camera with the Gang Box

3. Drill the screw holes in the ceiling/wall according to

the supplied drill template.

4. Hammer the supplied screws into the screw holes to

fix the gang box to the ceiling/wall.

Figure 2-5 Fix the Camera to the Ceiling

P Screw

T Screw

R Screw

Figure 2-3 3-axis Adjustment

Gang Box Cover

Screw

Rotation Position Range

[0°-360°]

Screw