HIKVISION DS-2AE7230TI-A 사용자 설명서 - 페이지 6

{카테고리_이름} HIKVISION DS-2AE7230TI-A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-2AE7230TI-A 11 페이지. Bullet & turret camera

5. Connect the corresponding cables and install the

gang box cover with fixing screws.

Figure 2-6 Fix the Camera to the Ceiling/Wall

6. Refer to step 5 of 2.1.1 to adjust the camera to get

an optimum angle.

2.2 Installation of Type II Camera

Steps:

1. Attach the drill template (supplied) to the place

where you want to fix the camera, and then drill the

screw holes and the cable hole in the ceiling/wall

according to the drill template.

2. Loosen the screws to remove the clip plate and take

out the main body.

3. Fix the mounting base to the ceiling with screws.

4. Route the cables through the cable hole and

connect the corresponding cables.

5. Install the main body to the mounting plate and

insert the clip plate.

Figure 2-7 Drill Template

Figure 2-8 Remove the Clip Plate

Figure 2-9 Install the Turret Camera