Majacraft M WH ROSE 사용 설명서 - 페이지 3

{카테고리_이름} Majacraft M WH ROSE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft M WH ROSE 12 페이지.

Assembling a Majacraft Rose

These instructions demonstrate how to assemble your Majacraft Rose spinning wheel

1. Prepare the components

We recommend that you find a clear work area where you can lay out all the components for

working on them.

The following tools are provided by Majacraft

- 4mm allen T wrench

- 2mm allen key

You will also need the following tools:

- Posidrive (Philips) screwdriver

Your wheel has been assembled at our workshop; it has been tested; it has been spun on; all screws

have been pre-fitted and some have been removed for partial disassembly.

Please unpack with care and retain the packaging. In the box will be:

1 Base assembly

1 Stem/Handle assembly

1 Drive wheel with drive axle

2 Pedals

4 Plastic Bobbins

1 Spinning Head

1 Flyer

1 Crank and Conrod assembly

1 Rose Carrier

1 Hardware Bag (screws, etc) spare screws are included

2. Insert handle stop

Required:

1 - M6 25mm JCB (1") bolt (in the hardware bag)

4mm allen T wrench (in the hardware bag)

Stem/Handle assembly

majacraft