Majacraft Pioneer X 매뉴얼 - 페이지 6

{카테고리_이름} Majacraft Pioneer X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft Pioneer X 11 페이지.

Slide the pulley onto the flyer shaft. Align the grub

screw over the flat area. Then use the 2mm allen key

to tighten the grub screw and secure the pulley on to

the flyer shaft.

5. Drive Band

Required:

1 - Green drive band (in the hardware bag)

Find the small flat area on the flyer shaft, it will be

near the bearing on the head. Turn the flyer shaft so

the flat is on top.

The green drive band goes on the groove on the drive wheel and

then through one of the grooves on the pulley.

majacraft