Majacraft Pioneer X 매뉴얼 - 페이지 4

{카테고리_이름} Majacraft Pioneer X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Majacraft Pioneer X 11 페이지.

You will require the three 40mm JCB bolts and the 4mm allen key. Position the base assembly on

it's edge and then push the JCB bolts through from underneath. Take care that the pedals do not

swing free and become damaged.

Align the JCB bolts with the threaded holes in the

stem/brace assembly. Use the 4mm allen key to

screw the JCB bolts into place but do not tighten

them fully.

3. Attach drive wheel to stem

Required:

5mm allen key (in the hardware bag)

Base/Stem assembly

Drive Wheel

When they all located correctly then tighten

the JCB bolts securing the stem onto the base

assembly.

majacraft