Majacraft Pioneer X Manual - Page 4

Browse online or download pdf Manual for Spinning Wheels Majacraft Pioneer X. Majacraft Pioneer X 11 pages.

Print Page

You will require the three 40mm JCB bolts and the 4mm allen key. Position the base assembly on

it's edge and then push the JCB bolts through from underneath. Take care that the pedals do not

swing free and become damaged.

Align the JCB bolts with the threaded holes in the

stem/brace assembly. Use the 4mm allen key to

screw the JCB bolts into place but do not tighten

them fully.

3. Attach drive wheel to stem

Required:

5mm allen key (in the hardware bag)

Base/Stem assembly

Drive Wheel

When they all located correctly then tighten

the JCB bolts securing the stem onto the base

assembly.

majacraft