MAJAR VS400SP 설치, 사용자 및 서비스 매뉴얼 - 페이지 8

{카테고리_이름} MAJAR VS400SP에 대한 설치, 사용자 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MAJAR VS400SP 14 페이지. Sand spreader

Loading of the sand spreader

Disengage the roller and close the protection flap.

Loading with bucket: When you charge the sand spreader from above, empty shacking to avoid

deterioration of the roller and the bearings. The sand level must not exceed the highest front part of the housing.

Loading by tilting the case: Tilt progressively the case actuating the double acting remote so that the

effet afin que le rabot touche le sol. Move back slowly in the sand pile, lift the case and move forward.

Repeat two or three times these operations until the correct filling of the case.

Spreading

Adjustment of the flap opening: The quantity of spread sand depends on

the flap opening and t de la fluidity of sand used. To obtain the spread

sanding tonnage in hectare, open the flap 1/3 and spread all the sand of the

case. The weight in tonnes necessary to cover 1 hectare (100m x 100m)

would be approximately : 8000 divided by the driven distance in meters (if

you drive 100 m to empty the entire case, the quantity on 1 hectare would

be: 8000/100 = 80 tonnes). Adjust the lever position according to your

needs.

Clutch: the clutch

operating control allows the activation of the roller. Always

disengage the roller during transport out of working area even

if the case is empty. Disengage the machine while it is off,

to facilitate the maneuver of the remote lever. You can adjust

the

remote box position sliding the horizontal tube and the

vertical tube.

Uncoupling of the sans spreader

- Move back the tractor and the sand spreader on a flat ground for storage.

- Lower the support stands securing the axles with the pins.

- Put the sand spreader on the ground.

- Stop the motor, apply the handbrake and remove the key.

- press a several times the lever of the double acting control valve and

uncouple the hydraulic hose.

! DANGER

- Uncouple next the push bar (3 point) of the tractor lifting

- Uncouple next the adjustable support changing length if necessary

- Uncouple next the lower arm non adjustable

- Make sure that Sand spreader is in a stable position

- start the tractor and move forward

DANGER

the driver's cabin

Un jet d'huile hydraulique dû à une fuite peut pénétrer sous la peau, ce qui

provoque de graves blessures. Consultez immédiatement un médecin.

Never make adjustments or interventions on the machine when somebody is on

UNCOUPLING

MINI

MAXI

COUPLING