MAJAR VS400SP 설치, 사용자 및 서비스 매뉴얼 - 페이지 9

{카테고리_이름} MAJAR VS400SP에 대한 설치, 사용자 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MAJAR VS400SP 14 페이지. Sand spreader

DANGER

DAILY MAINTENANCE BEFORE STARTING WORK

•

Lubrication: Do not leave excess grease on the pieces. Clean the

grease gun and use the grease pump. Grease the wheel hubs and the

two roller bearings.

•

Tire pressure: 0.5 bar

•

Tightening torque of the fasteners: make sure that the fasteners

are properly tightened. The vibrations of the tractor tend to loosen the

screws and nuts. Check especially the tightening of the two roller

bearings.

MAINTENANCE AFTER EVERY CAMPAIGN OR ONCE A YEAR

•

Clean the machine completely from accumulations of materials or debris that reduce the yield or hide leak or

faillure

•

After cleaning with water, grease the bearings, hubs, springs and clutch mechanism

•

Check the tightening torque specified on the table below

•

Eliminate the rust and touch up paint if necessary

•

Check the wear of the rubbers.

Screw

Wrench

diameter (mm) size (mm)

16/17

18/19

21/22

MAINTENANCE BY USER

Before performing service or maintenance, stop the motor, apply the handbrake

and remove the key before all settings, adjustments, maintenance or

disassembly. Never let anyone else to the driver's cabin

Torque

setting (daN.m)

2.5

8.5

21.5

43.5

GRAI SSEURS

VALVE

RESSORT