Gree NRQD16G/A-S 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Gree NRQD16G/A-S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree NRQD16G/A-S 19 페이지. Hot water converter of gmv5 home

Notes:

① Conduct thermal insulation for refrigerant copper tube; in order to ensure the using effect, thickness of

thermal insulating material should not be less than 8mm.

② Make sure that the refrigerant copper tube is sealed up without leakage.

5.1.5 Installation Requirements for Water System

（1） Connect cooling water inlet of pressure bearing water tank to tap water pipe, connect

hot water outlet to terminal water using outlet.

（2） Tap water inlet should connect to one-way valve and filter.

（3） For easy maintenance, water inlet and water outlet should be installed with manual

cut-off valve.

（4） Install air release valve in the highest point of water pipe.

5.1.6 Installation Method of Hot Water Converter

Wall-mounted installation:

（1） Install wall-mounted board

Notes:

① Use line aligning method or leveling instrument to find the level position;

② Use screws to fix the wall-mounted board on the wall after being processed (such as be embedded with

plastic particles);

③ After installing the board, check if it is firmly installed.

（2） Hang the hot water converter on the wall-mounted board

Hot water converter of GMV5 Home Installation and Operation Manual

Fig. 5.3