Jägermeister Shotmeister 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Jägermeister Shotmeister에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jägermeister Shotmeister 8 페이지.

INSTRUCTIONS

Unpacking Instructions

1. Start by removing the included bag of bottle stoppers and drip tray

2. Remove foam inserts to reveal the machine

3. Carefully remove the machine by lifting it straight up out of the box

DO NOT HOLD THE SHOTMEISTER BY THE FRONT FAUCET!

4. Place the machine in desired location with 4 inches of clearance on all sides

5. REMOVE PAPER PADDING from tap spout and inner chilling chamber

6. Before plugging in, make sure the power switch in the back is in the

OFF position

7. Plug in, and flip the switch to ON

8. Insert drip tray in the lower front side of the machine

Retain your original box and packing materials for a period of 1 year.

These items are needed if your machine requires service or repairs.

Visit www.tapmachine.com for information on requesting service or repairs.

Visit www.jagercups.com to order shot and drink cups.

Inserting a bottle

1. It is recommended that you place a pre-chilled bottle into the Shotmeister

2. Unscrew the bottle cap (picture A) and replace it with an orange bottle stopper

(picture B) screwing it on tightly

3. Turn the bottle upside down into the chilling chamber (picture C)

with the bottle stopper engaging the well (picture D)

4. Bottle is inserted correctly when the Jägermeister begins to drain from the bottle

into the machine

5. When closing the lid, make sure to PRESS DOWN FIRMLY and ensure the lid is

completely sealed