Bristan EXD 1HBF C 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Bristan EXD 1HBF C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan EXD 1HBF C 16 페이지.

Installation Cont.

Bath Shower Mixer

1. Remove the metal and rubber washers

from body/ handset holder threaded tails.

2. Fit the body to the bath ensuring that

the washer is fitted between the body and

the bath.

3. Secure the body to the bath using the

washer and metal backnut below the bath.

Tighten the backnut onto the threaded

tail. A suitable spanner may be required to

fully tighten the backnut.

4. Screw the flexi tails into the bottom of

mixer body and tighten by hand only

(DO NOT OVERTIGHTEN)

5. Connect the flexi tails to the hot and

cold water supplies.

6. Fit the handset holder base ensuring

the washer is fitted between the base and

the bath.

7. Secure the handset holder base to the

bath using the washer and metal backnut

below the bath. Tighten the backnut onto

the threaded tail.

A suitable spanner may be required to

fully tighten the backnut.

8. Feed the hose through the handset

holder base and connect the hose to the

shower outlet pipe using the small sealing

washer.

9. Fit the handset to the hose using the

small washer.

10. Turn on both water supplies, operate

handle in both directions, letting the water

flow for a few minutes to flush through

the system.

11. Check all joints and connections for

leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.