Bristan EXD 1HBF C Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Produkt hydrauliczny Bristan EXD 1HBF C. Bristan EXD 1HBF C 16 stron.

Installation Cont.

Bath Shower Mixer

1. Remove the metal and rubber washers

from body/ handset holder threaded tails.

2. Fit the body to the bath ensuring that

the washer is fitted between the body and

the bath.

3. Secure the body to the bath using the

washer and metal backnut below the bath.

Tighten the backnut onto the threaded

tail. A suitable spanner may be required to

fully tighten the backnut.

4. Screw the flexi tails into the bottom of

mixer body and tighten by hand only

(DO NOT OVERTIGHTEN)

5. Connect the flexi tails to the hot and

cold water supplies.

6. Fit the handset holder base ensuring

the washer is fitted between the base and

the bath.

7. Secure the handset holder base to the

bath using the washer and metal backnut

below the bath. Tighten the backnut onto

the threaded tail.

A suitable spanner may be required to

fully tighten the backnut.

8. Feed the hose through the handset

holder base and connect the hose to the

shower outlet pipe using the small sealing

washer.

9. Fit the handset to the hose using the

small washer.

10. Turn on both water supplies, operate

handle in both directions, letting the water

flow for a few minutes to flush through

the system.

11. Check all joints and connections for

leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.