Bristan H64DMT2 설치 지침 및 사용자 설명서 - 페이지 11

{카테고리_이름} Bristan H64DMT2에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan H64DMT2 20 페이지. Single sequential d08 tmv3 thermostatic mixer taps

Installation - Deck Mounted

1. Prepare Water Supply Pipes

Terminate suitable pipework under

the sink / work surface ensuring the

centres of the hot and cold water

supply pipes are 150-200mm apart.

2. Fit Mixer Tap

Position the mixer tap into the holes

in the sink / work surface.

Tighten the backnuts fully (a suitable

spanner may be required to fully

tighten the backnuts).

3. Connect Pipework

Push the nuts and olives onto the

pipework. Push the pipework into the

connections ensuring the olives are

against the connections and tighten

the compression nuts to create a

water tight seal.

4. Tighten Mixer Connections

Using a suitable hexagonal key

tighten the front and back grub

screws on to the connections.

Note: The front and back grub

screws must be tightened equally.

You can now refer to the TMV

Manual to Commission the valve.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.