Bristan H64DMT2 Instruções de instalação e manual do utilizador - Página 11
Procurar online ou descarregar pdf Instruções de instalação e manual do utilizador para Produto de canalização Bristan H64DMT2. Bristan H64DMT2 20 páginas. Single sequential d08 tmv3 thermostatic mixer taps
Imprimir página
Installation - Deck Mounted
1. Prepare Water Supply Pipes
Terminate suitable pipework under
the sink / work surface ensuring the
centres of the hot and cold water
supply pipes are 150-200mm apart.
2. Fit Mixer Tap
Position the mixer tap into the holes
in the sink / work surface.
Tighten the backnuts fully (a suitable
spanner may be required to fully
tighten the backnuts).
3. Connect Pipework
Push the nuts and olives onto the
pipework. Push the pipework into the
connections ensuring the olives are
against the connections and tighten
the compression nuts to create a
water tight seal.
4. Tighten Mixer Connections
Using a suitable hexagonal key
tighten the front and back grub
screws on to the connections.
Note: The front and back grub
screws must be tightened equally.
You can now refer to the TMV
Manual to Commission the valve.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
11