Bristan IRBS1-CP 설치 지침 및 사용자 설명서 - 페이지 12

{카테고리_이름} Bristan IRBS1-CP에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRBS1-CP 20 페이지. Infrared automatic basin spouts

Installation

Inserting Batteries

Your infrared spout is supplied with a

back up battery pack (batteries not

included). In the event of a power failure

the batteries will override the mains

power supply to ensure the spout

continues to function.

Before fitting the power supply box into

position on the wall/floor, batteries (not

included) will need to be fitted.

1. Remove Power Supply Box Cover

Remove all four screws in each corner of

the power supply box and remove the

cover.

2. Remove Battery Box

Remove the battery case from the

power supply box and remove the screw

in the center of the case.

3. Insert Batteries

Insert 4 x AA batteries (not included)

into the battery box ensuring they are

inserted the correct way.

Note: Only use 1.5V AA (LR6) Alkaline

batteries (preferably => 2000mAh for

good battery life).

4. Replace Battery Box

Replace the battery case cover. Replace

and tighten the screw. Insert the battery

case back into the power supply box.

5. Replace Power Supply Cover

Replace the power supply cover and

tighten all 4 screws ensuring they are all

fully tightened.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Battery

Case