Bristan IRBS1-CP Инструкции по установке и руководство пользователя - Страница 12
Просмотреть онлайн или скачать pdf Инструкции по установке и руководство пользователя для Сантехническая продукция Bristan IRBS1-CP. Bristan IRBS1-CP 20 страниц. Infrared automatic basin spouts
Печатать страницу
Installation
Inserting Batteries
Your infrared spout is supplied with a
back up battery pack (batteries not
included). In the event of a power failure
the batteries will override the mains
power supply to ensure the spout
continues to function.
Before fitting the power supply box into
position on the wall/floor, batteries (not
included) will need to be fitted.
1. Remove Power Supply Box Cover
Remove all four screws in each corner of
the power supply box and remove the
cover.
2. Remove Battery Box
Remove the battery case from the
power supply box and remove the screw
in the center of the case.
3. Insert Batteries
Insert 4 x AA batteries (not included)
into the battery box ensuring they are
inserted the correct way.
Note: Only use 1.5V AA (LR6) Alkaline
batteries (preferably => 2000mAh for
good battery life).
4. Replace Battery Box
Replace the battery case cover. Replace
and tighten the screw. Insert the battery
case back into the power supply box.
5. Replace Power Supply Cover
Replace the power supply cover and
tighten all 4 screws ensuring they are all
fully tightened.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
12
+
-
Battery
Case