Bristan Z2 DUS 1/2 C 피팅 지침 매뉴얼 - 페이지 9

{카테고리_이름} Bristan Z2 DUS 1/2 C에 대한 피팅 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan Z2 DUS 1/2 C 12 페이지. Tap
Bristan Z2 DUS 1/2 C에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (2 페이지)

페이지 인쇄

5. Cleaning & Maintenance

Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.

All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp

cloth. Stains can be removed using washing up liquid. All bathroom cleaning products (powders and liquids) will

damage the surface of your fitting, even the non-scratch cleaners.

NOTE:- Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or phosphoric

acid.

We advise that your fitting is regularly serviced, particularly in hard water areas.

Traditional type valves: if the fitting leaks from the spindle.

1. Remove fitting handle (if necessary).

2. Tighten the gland nut on top of the valve.

All valve types- if the fitting begins to drip:-

1. Turn off the water supplies.

2. Remove fitting handle and valve.

3. Carefully clean the valve seating and rubber washer.

4. Replace valve and then turn on the water supplies.

5. If the problem persists contact our helpline quoting the product code overleaf.

Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products.

Using just water, E-cloth gives a smear free, deep clean by breaking up and

holding dirt, which normal cloths leave behind. Order through your Bristan

stockist.

(ORDER CODE: ECLOTH)