Bristan Z2 DUS 1/2 C Montaj Talimatları Kılavuzu - Sayfa 9
Sıhhi Tesisat Ürünleri Bristan Z2 DUS 1/2 C için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Bristan Z2 DUS 1/2 C 12 sayfaları. Tap
Ayrıca Bristan Z2 DUS 1/2 C için: Kurulum Talimatları ve Kullanım Kılavuzu (2 sayfalar)
Sayfayı Yazdır
5. Cleaning & Maintenance
Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.
All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp
cloth. Stains can be removed using washing up liquid. All bathroom cleaning products (powders and liquids) will
damage the surface of your fitting, even the non-scratch cleaners.
NOTE:- Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or phosphoric
acid.
We advise that your fitting is regularly serviced, particularly in hard water areas.
Traditional type valves: if the fitting leaks from the spindle.
1. Remove fitting handle (if necessary).
2. Tighten the gland nut on top of the valve.
All valve types- if the fitting begins to drip:-
1. Turn off the water supplies.
2. Remove fitting handle and valve.
3. Carefully clean the valve seating and rubber washer.
4. Replace valve and then turn on the water supplies.
5. If the problem persists contact our helpline quoting the product code overleaf.
Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products.
Using just water, E-cloth gives a smear free, deep clean by breaking up and
holding dirt, which normal cloths leave behind. Order through your Bristan
stockist.
(ORDER CODE: ECLOTH)
09