Centrometal EKO-CK P 25 기술 지침 - 페이지 6

{카테고리_이름} Centrometal EKO-CK P 25에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Centrometal EKO-CK P 25 20 페이지. Hot water boiler
Centrometal EKO-CK P 25에 대해서도 마찬가지입니다: 사용 및 유지 관리 (20 페이지)

페이지 인쇄
Centrometal EKO-CK P 25 기술 지침

Changing of door opening direction

2.1 CHANGING OF DOOR OPENING DIRECTION
Upper and lower boiler door are factory designed so that it can be changed opening direction to left
or right side. Opening direction can be changed. It is neccesary to change positions of universally
parts responsible for direction of door opening. Universally parts are shown in figure 4. Handle,
hinge and handle latch holder are universlly parts which holde upper and lower boiler door. Lower
boiler door have one additional piece (microswitch breaker) which position must be changed. Door
are default mounted to open on right side. On page 7 are shown how to change direction of door
opening on lef side.
Procedure are same for upper and lower boiler door except microswitch on lower boiler door.
Figure 2.
Lower boiler door which opens
to the right side (default).
Figure 4. Universally door parts needed to install on opposite side to change the door
opening direction
1
6
2
3
Figure 3.
Lower boiler door readjusted for opens
*
4
*
to the left side.
1
Handle
2
Hinge
3
Handle latch holder
(on the boiler)
*
4
Microswitch breaker
Only on lower boiler door.
Technical instructions EKO-CK P