Bristan MT753CP-ISO 설치 지침 및 사용자 설명서 - 페이지 6

{카테고리_이름} Bristan MT753CP-ISO에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan MT753CP-ISO 8 페이지. Temperature stabilised thermostatic mixing valve

페이지 인쇄

Maintenance

Temperature Adjustment

This valve is pre-set to a maximum

outlet temperature of 43°C.

It can be adjusted to have a maximum

temperature between 30°C - 55°C

IMPORTANT: To comply with the

TMV scheme, this valve cannot have a

maximum outlet temperature of 44°C.

If set higher, it will no longer comply

with the TMV scheme.

Please see the TMV manual supplied

with this valve for more details.

To adjust the temperature, follow

the steps below:

1. Turn on the valve and set to the

maximum temperature.

2. Remove the anti-tamper cover (17)

from the body (12). Using a suitable

hex key, insert through the head

assembly (20) and locate into the

groove of the adjusting screw (18).

3. Turn the adjusting screw (18)

clockwise for a cooler temperature,

anti-clockwise for a hotter

temperature.

4. Wait for a few minutes after adjusting

for the temperature to stabilise. Use

a thermometer to measure the outlet

temperature. Repeat step 3 until you

have reached the desired result.

5. Replace the anti-tamper cover (17).

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Head Assembly Parts

Part

Description

No.

Adjusting Screw

BS010 O-Ring 90 Shore

22mm Tee-Valve

Head Assembly

BS029 O-Ring

Qty