Bristan MT753CP-ISO 설치 지침 및 사용자 설명서 - 페이지 7

{카테고리_이름} Bristan MT753CP-ISO에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan MT753CP-ISO 8 페이지. Temperature stabilised thermostatic mixing valve

페이지 인쇄

Maintenance

Cartridge Cleaning

To clean the cartridge, follow

the steps below:

1. Isolate the hot and cold water

supplies. Remove the anti-tamper

cover (17).

Note: If you have purchased the

MT753CP-ISO, simply turn the screws

in the isolation assemblies (4G) to

isolate the water supplies.

2. Unscrew the head assembly (20)

from the body (12) using a suitable

spanner.

IMPORTANT: Note the position of

the Adjusting Screw (18) before

removing. It will need to be replaced

in the same position in order to

maintain the current maximum

temperature.

3. Remove the thermostat (10), piston

assembly (8), thermostat housing (16)

and return spring (11).

4. Soak all components in a suitable

solution until fully de-scaled. Check

all seals and O-Rings for damage and

replace if necessary.

5. Re-grease parts using a WRAS

Approved grease and reverse the

steps to re-assemble the valve.

6. Turn on the water supply and check

all joints and connections for any

leaks.

7. Follow the Temperature Adjustment

process to check and re-calibrate the

maximum temperature.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

MT753CP-ISO Isolation Valve

Assembly Parts

Part

Description

No.

22mm Body

Plated Brass Ball

PTFE Seat

22mm Copper Olive

22mm Compression Nut

Brass Nut

Actuating Stem

O-Ring

Connecting Nut

Qty