Greemotion GM-2013 매뉴얼 - 페이지 6

{카테고리_이름} Greemotion GM-2013에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Greemotion GM-2013 11 페이지. Firepit dining table

Fasten the frame A (#2) and the frame B (#3) to the

rear frame (#1) by using bolts (#14) and washers

(#16). Keep the bolts loose.

Note:

The labels marked "2" and "3" on the frames should

coincide with Figure 1 to ensure proper assembly.

Fasten the lower connector (#8) to the corner of

the bottom rim of the frame B (#3) by using bolt

(#14) and washers (#16). Then, insert the front door

(#5) into the connector tab of the lower connector

(#8).

Note:

The lower connector (#8) is marked with an "E".

ASSEMBLY INSTRUCTIONS

14 16

Fasten the bottom frame (#4) and cross brace (#6)

to the frames (#2 and #3) by using bolts (#15),

washers (#16) and screws (#13).

Insert the upper connector (#9) into the holes of

the front door (#5). Fasten the upper connector

(#9) to the frame B (#3) by using bolt (#14) and

washers (#16). Completely tighten all of the nuts

and bolts. Close the doors.

Note:

Shut the doors lightly. Do not slam the doors to

close.

4 - 9