Greemotion GM-2013 매뉴얼 - 페이지 7
{카테고리_이름} Greemotion GM-2013에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Greemotion GM-2013 11 페이지. Firepit dining table
페이지 인쇄5
19
19
19
19
7
Place the table top (#7) onto the frame assembly.
Fasten them together by using bolts (#14) and
washers (#16). Fasten the burning system (#18) to
the table top (#7) by using bolts (#19). Make sure
that all of the bolts have been tightened completely.
Note:
The igniter valve should be facing towards the front
left side of the appliance.
7
4
Open the front door (#5) and place the tank into
the bottom frame (#4). Secure in place by using
the plastic screw.
Note:
Secure the tank in place by turning the plastic
screw clockwise as illustrated above.
ASSEMBLY INSTRUCTIONS
14
16
18
Igniter
Valve
5
Plastic
Screw
6
7
A
Place the tiles (#11 and #12) onto the table top
(#7).
Note:
If any EVA foams on the table top (#7) are missing,
there are extra EVA foams in the hardware kit.
8
Rotate
Clockwise
Attach the burning system (#18) to the tank by
rotating clockwise to its connector. See Figure 8.
5 - 9
12
11
Caution: The Tank
must face this way.
18