Bristan IRSD1-BZ 설치 지침 및 사용자 설명서 - 페이지 3
{카테고리_이름} Bristan IRSD1-BZ에 대한 설치 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bristan IRSD1-BZ 16 페이지. Infrared automatic soap dispensor
Bristan IRSD1-BZ에 대해서도 마찬가지입니다: 설치 지침 및 사용자 설명서 (16 페이지)
페이지 인쇄
Important Safety Information
• Please read these instructions
thoroughly and retain for future
use.
• All products manufactured and
supplied by Bristan are safe
provided they are installed, used
correctly and receive regular
maintenance in accordance with
these instructions.
• If you are in any doubt about your
ability to install this product safely
you must employ the services of
an experienced qualified plumber.
•
Warning: Do not operate the
product if you suspect it is
frozen. Do not site it where
it might be subjected to freezing
conditions.
Specifications
Sensing Range: 0-8 cm
Activation Time: 0.5-1s
Power Supply: AC: 230V
Bottle Capacity: 1.6 litres
Ambient Temperature: Normal Temperature
Viscosity of liquid soap: 100-3500cp (mpA
This product should not be used to dispense alcohol-based hand sanitizer
gels or liquids.
Recommended Usage
Domestic
Light
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
DC: 1.5V (4 x AA alkaline batteries - Not Supplied)
Heavy
Health
Care
• Remove all packaging and check
the contents for damage before
starting installation.
• Before starting any installation
please consider the following:
before drilling into walls, check that
there are no hidden electrical wires,
cables or water supply pipes. This
can be checked with the aid of an
electronic detector.
• If power tools are used do not
forget to:
- Wear eye protection
- Unplug equipment after use
• This product must not be modified
in any way as this will invalidate the
guarantee.
·
s)
3